+8618149523263

Apr 22, 2021

Coaxial cables can be divided into two basic types, baseband coaxial cables and broadband coaxial cables. At present, the baseband is a commonly used cable, and its shielding line is made of copper mesh, with a characteristic impedance of 50 (such as RG-8, RG-58, etc.); the shielding layer of the commonly used broadband coaxial cable is usually aluminum It is stamped and has a characteristic impedance of 75 (such as RG-59, etc.).

Charging Pile Cables Also Have Technical Specifications

Coaxial cables can be divided into thick coaxial cables and thin coaxial cables according to their diameter. Thick cable is suitable for relatively large local networks. It has a long standard distance and high reliability. Since the cable does not need to be cut during installation, the network access position of the computer can be flexibly adjusted according to the needs. However, the thick cable network must be installed with transceiver cables. The difficulty is great, so the overall cost is high. On the contrary, the installation of thin cables is relatively simple and the cost is low. However, because the cable needs to be cut during the installation process, the two ends must be installed with the basic network connector (BNC), and then connected to the two ends of the T-connector, so when there are too many connectors, it is easy to produce bad Hidden danger, this is one of the most common faults that occur in the current running Ethernet.

What Is Twisted Pair?

Enviar la consulta